Description
INDICATIONS
As a liner or base in prepared cavities.
INSTRUCTION
Prepare the cavity, clean and dry it thoroughly. Care should be taken to ensure that no traces of eugenol are left in the cavity. Jen-Line LCF lining material should not be used in combination with the eugenol-containing materials. It is therefore recommended to use eugenol-free temporary cements.
Put the required portion of Jen-Line LCF on a mixing pad shortly before the application. Avoid exposure to daylight as it may cause premature setting of the material. Apply a layer of the Jen-Line LCF to the dentine using a small round condenser. Jen-Line LCF should be applied to dentine only. Do not apply it to enamel.
The layer thickness should not exceed 1 mm. Should a thicker lining is necessary, apply and cure several subsequent layers. Each layer should be light-cured separately. Jen-Line LCF is cured by a special dental light unit (halogen, LED, etc.). The light guide should be positioned as close as possible to the liner. When the light guide is 2 mm above the liner surface, cure the liner for 20 seconds at least. When light guide is 5 mm above the liner surface, the curing time should be extended to 30 – 40 seconds. Due to high opacity of Jen-Line LCF the curing time should not be less than 20 seconds under any circumstances.
PACKING
Jen-Line LCF is packed in 3 g syringes
Reviews
There are no reviews yet.